1. Home
  2. Products
  3. Shrink Wrapping Machine
  4. Large Size Side Sealer Shrink Tunnel

Large Size Side Sealer Shrink Tunnel

Samples of Shrink Tunnel

Product Introduction of Shrink Tunnel
The fully automatic side sealer and shrink tunnel is suitable for packing longer items such as wood and aluminum. It uses an advanced imported PLC programmable controller, with safety protection and an alarm to ensure the machine's high speed stability. A variety of settings can be easily set on the touch screen. Using a side sealing design, there is no limit to the product's packaging length. The sealing line height can be adjusted according to the product's height that is to be packed. The side sealer is equipped with an imported detection photoelectric, horizontal and vertical detection all in one group, making switch selection easy.

Automatic Grade: Automatic
Driven Type: Electric
Suitable shrink film: POF
Application: suitable for large packing sizes, no limit on length, width can be 500mm.

Technical Data of Shrink Tunnel:
Model BTH-550 BM-500L
Max. Packing Size (L)No limited (W+H)≤500 (H)≤200 (L)No limited x(W)450 x(H)250mm
Max. Sealing Size (L)No limited (W+H)≤550 (L)1500x(W)500 x(H)300mm
Packing Speed 30-40 packs/min. 0-30 m/min.
Electric Supply & Power 220V / 50Hz 3 kw 380V / 50Hz 16 kw
Max Current 16 A 32 A
Air Pressure 5.5 kg/cm3 /
Weight 800 kg 400 kg
Overall Dimensions (L)2000x(W)1270 x(H)1300mm (L)1800x(W)1100 x(H)1300mm

Product Features of Shrink Tunnel:
1. Side blade sealing is continuous along the length of the product. There are no limits on the product length.
2. Side sealing lines are easily adjusted to the desire position based on the product's height in order to achieve the best sealing results.
3. The shrink tunnel and side sealing machine uses an advanced Omron PLC controller and touch/operator interface to accomplish all tasks easily and on time.
4. The sealing knife uses an aluminum knife with DuPont Teflon with a non-sticl coating and high temperature resistance to avoid cracking, choking or smoking while still preventing pollution. The sealing balance is also equipped with an automatic protection function in order to effectively prevent accidental cutting.
5. An automatic film feeding and punching device is used to drill away air and ensure the quality of the final packing result.
6. The packaging machine is equipped with an imported American Banner photoelectric device for horizontal and vertical detection, easily allowing for the finish of sealing thin and smaller items.
7. A manually adjustable film-guide system and feeding conveyor platform makes the machine suitable for different widths and heights. When the packaging size changes, the adjustment is easily carried out by rotating the hand wheel without changing molds or bag makers.
8. The BM-500L shrink wrap machine uses an advanced circulation blowing method from the bottom of the tunnel. It is equipped with a double frequency inverter to control the blowing, and adjust the blowing direction and volume from the bottom.

Parts of the machine
Component List of Shrink Tunnel
BTH-550
NO NAME BRAND QTY
1 product infeed motor SESAME (Taiwan ) 1
2 product output motor SESAME(Taiwan ) 1
3 Film deliver motor SESAME(Taiwan ) 1
4 waste film recycling motor SESAME(Taiwan ) 1
5 The main cylinder SHAKO(Taiwan ) 1
6 Side sealer cylinder AIRTAC 1
7 Breaker Schneider (France ) 2
8 PLC programmable controller OMRON (Japan) 1
9 Temperature controller OMRON (Japan) 2
10 Touch screen MCGS 1
11 Intermediate relay OMRON (Japan) 7
12 Solid state relay OMRON (Japan) 2
13 vertical sensor BANNER (USA ) 2
14 Horizontal sensor BANNER (USA ) 2
15 Cylinder solenoid valve SHAKO(Taiwan ) 2
16 Air Filter SHAKO (Taiwan ) 1
17 Proximity switch AUTONICS (Korea ) 1
18 Conveyor belt SIEGLING (Germany ) 2
19 Synchronous belt EVER-POWER(USA) 2
20 Seal cutting knife DAIDO (Japan ) 2
BM-500L
No. Item Brand Qty
1 Infeeding motor CPG(Taiwan) 1
2 Wind blowing motor DOLIN(Taiwan) 1
3 Infeeding inverter DELTA(Taiwan ) 1
4 Wind blowing inverter DELTA(Taiwan ) 1
5 Temperature controller OMRON (Japan ) 1
6 Breaker SCHNEIDER(France ) 5
7 Contactor SCHNEIDER (France ) 1
8 Auxiliary relay OMRON (Japan ) 6
9 Solid state relay MAGER 1
10 Power switch SIEMENS (Germany ) 1
11 Emergency MOELLER(Germany) 1
12 Heating tube Taiwan 9
13 Conveying silicone tube Taiwan 162
14 Visible window High temperature resistant explosion-proof glass 3
Option of Shrink Tunnel
Model BTH-550 BM-500L
Max. Packing Size (L)No limited (W+H)≤500 (H)≤200 (L)No limit x(W)450 x(H)250mm
Max. Sealing Size (L)No limited (W+H)≤550 (L)1500x(W)500 x(H)300mm
Packing Speed 30-40 packs/min. 0-30 m/min.
Electric Supply & Power 220V / 50Hz 3 kw 380V / 50Hz 16 kw
Max Current 16 A 32 A
Air Pressure 5.5 kg/cm3 /
Weight 800 kg 400 kg
Overall Dimensions (L)2000x(W)1270 x(H)1300mm (L)1800x(W)1100 x(H)1300mm

Besides large size side sealer shrink tunnel for packaging longer items like wood and aluminum, QCPack, as a reliable packaging machinery manufacturer, also provides cellophane wrap machine, chamber shrink wrapping machine, automatic L bar sealer shrink tunnel, etc. The packaging equipment is widely applied for packaging medicine, food, cosmetics, electronics, stationery, daily use products and healthcare products. With 10 years of experience in the packaging industry, we can manufacture custom designed machines to meet client demands.

Inquiry Form